Product Description
A-ARM (High Profile) Automatic Pallet Wrapper
The HP-SWA Series quality hi-profile spiral stretch wrap system's construction features all structural steel construction, with a structural steel H-beam machine tower. A unique patented fully automatic stretch wrapper that can be operated from the forklift with a wireless remote. Eliminates the need for the operator getting off and on the lift to attach and cut the film. Provides a huge labor cost savings while eliminating safety concerns.
Load capacity:
- Max weight is 4,500 lb. dynamic and 10,000 lb. static capacity
- Maximum load size: 64"W x 64"L (90" load diagonal) x 75"H
Speed:
- Up to 35 loads per hour
*Rates of processing vary with size, number of wraps and fork truck load and unload time
Turntable specifications:
- 48” octagonal formed steel plate
- 4 point caster support system
- Turntable height less than 11” from floor
- ANSI #50 direct chain drive c/w chain tensioner
- Between 3 and 12 RPM rotational speed c/w soft start acceleration
- 1/2 HP AC variable speed motor
- Final revolution deceleration and positive stop alignment
- Front and back forklift ports for easy movement
- Accu-Count exact turntable positioning system for additional film savings
Film carriage elevator:
- 1/2 HP AC variable speed motor
- ANSI #40 direct chain drive c/w shock dampener and Anti-Fall Safety Device
Film delivery system:
- NEW Super Rapid Thread II™ 20" capacity pre-stretch film carriage
- Special film threading device – Uniquely orientates the sticky side of the film against the pre-stretch rollers and the inside of the load
- 1/2 HP AC variable speed motor
- Fully electronic dynamic dancer corner compensation
- 33% to 313% fixed stretch capability
- Pre-stretch ratio variable using easy sprocket change
- Carriage descent obstruction safety shut-off device
- Rapid Thread™ safety door with auto power cut-off switch
- Side mounted film carriage for operator convenience and safety
- Superior film-to-roller contact area
- Lifetime warranty on pre-stretch rollers
Electrical input requirements:
- 115 volts 1 phase 60 Hz 15 amps with dedicated service
Automation features:
- All electric – no pneumatics required
- Cousins exclusive patent pending A-Arm film cut and hold device starts and ends the wrap process at the top of the load. This uniquely different approach to attaching and cutting the stretch film provides you with these benefits:
- Selectable top banding capability
- Stabilizes the load early in the wrap cycle
- Places the ending film tail at the top of the load instead of the bottom
- There is no film clamp on the turntable that can be damaged by debris or operator error – also eliminates the need for slip-rings to supply power onto the turntable for less maintenance
- Load placement on the turntable is not critical
- No air hook-ups or noisy compressors
- Automatic first revolution load scanning safety feature detects uneven or partial stacked top layers and automatically adjusts A-Arm height clear of obstructions
- A-Arm anti-fall safety device
Control features:
- Electronic controls with LED operator interface
- Wireless remote start/stop control with one transmitter (additional transmitters are available)
- Power off – on – reset switch and power on indicator light
- Single button auto wrap cycle start/pause
- Cycle pause for applying top sheets
- Reinforce wrap control for mid-wrapping
- Emergency stop button
- Turntable jog button
- Film carriage lower and raise buttons
- Film tension (force-to-load) control
- Separate film carriage raise and lower speed controls
- Variable turntable speed control
- Triple beam automatic load height detection sensor for dark or shiny loads
- Separate 1 to 12 revolution top and bottom wrap control
- Selectable reduced film tension parameters for wrapping top and/or bottom of load
- Non-proprietary UL/CSA approved components
- A – B – C wrap program selector with capability to input and store unique wrapping parameters for each program
Structural features:
- All structural and formed steel construction
- Forklift truck portable base structure design – lifting tubes included for front and rear access
- Electro-static powder coated paint finish
