Product Description
Standard Model Semi-Auto High Profile Wrapper
The HP-SW Switch High Profile Pallet Wrapper is the only machine available that can be easily converted to a labor-saving fully automatic on-site at a later date. This quality hi-profile spiral stretch wrap system's construction features all structural steel construction, with a structural steel H-beam machine tower.
Load capacity:
- Maximum load weight: 4,500 lb. dynamic – 10,000 lb. static
- Maximum load size to safely clear the tower: 67"W x 67"L (96" load diagonal)
- Maximum load height: 80"H (plus up to 4″ top overlap)
Speed:
- Up to 35 loads per hour (single turntable)
*Rates of processing vary with size, number of wraps and fork truck load and unload time.
Turntable specifications:
- 48″ octagonal thick formed steel plate turntable
- 4 point caster support system
- Turntable height less than 11″ from floor
- ANSI #50 direct chain drive c/w chain tensioner
- 3-12 RPM rotational speed c/w soft start acceleration
- 1/2 HP AC variable speed motor
- Final revolution deceleration and positive stop alignment
- Front and back forklift ports for easy movement
- Accu-Count exact turntable positioning system for additional film savings!
Film carriage elevator:
- 1/2 HP AC variable speed motor
- ANSI #40 direct chain drive c/w shock dampener and anti-fall safety device
Film delivery system:
- NEW Super Rapid Thread II™ 20" capacity pre-stretch film carriage
- Special film threading device – Uniquely orientates the sticky side of the film against the pre-stretch rollers and the inside of the load
- 1/2 HP AC variable speed motor
- Fully electronic dynamic dancer corner compensation
- 33% to 313% fixed stretch capability
- Pre-stretch ratio variable using easy sprocket change
- Carriage descent obstruction safety shut-off device
- Rapid Thread™ safety door with auto power cut-off switch
- Side mounted film carriage for operator convenience and safety
- Superior film-to-roller contact area
- Lifetime warranty on pre-stretch rollers
Electrical input requirements:
- 115 volts 1 phase 60 Hz 15 amps
Control features:
- Electronic controls with LCD operator interface
- Power off – on – reset switch and power on indicator light
- Single button auto wrap cycle start/pause
- Cycle pause for applying top sheets
- Reinforced wrap control for mid-wrapping
- Base or top wraps first program
- Up only or up/down wrap program
- Emergency stop button
- Turntable jog button
- Film carriage lower and raise buttons
- Film tension (force-to-load) control
- Separate film carriage raise and lower speed controls
- Operator programmable turntable speed control
- Triple beam automatic load height detection sensor for dark or shiny loads
- Separate 1 to 12 revolution top and bottom wrap control
- Selectable reduced film tension parameters for wrapping top and/or bottom of load
- A – B – C wrap program selector with capability to input and store unique wrapping parameters for each program
Structural features:
- All structural steel construction
- Forklift truck portable base structure design – lifting tubes included for front and rear access
- Electro-static powder coated paint finish
