Product Description
3200 Platform (High Profile) Automatic Pallet Wrapper
A unique and fully automatic stretch wrapper that can be operated from the forklift with a wireless remote. Eliminates the need for the operator getting off and on the lift to attach and cut the film. Provides a huge labor cost savings while eliminating safety concerns. The High-Profile 3200 Platform Automatic Pallet Wrapper is built in North America with brand name components. The 3200 has features & benefits that surpass the competition.
Production speed:
- 1-40 loads per hour - NOTE: Process rates will vary with load size, number of wraps and forklift load/unload time
Load capacity:
- Maximum load weight: 4,500 lb. dynamic – 10,000 lb. static
- Maximum load size: 50″W x 50″L (71″ max. load diagonal) x 80″H
- Minimum load size: 30″W x 30″L x 24″H
Turntable:
- 52″ octagonal 5/16″ thick formed steel plate turntable
- 4-point caster support system
- Turntable height less than 12″ from floor
- ANSI #50 direct chain drive c/w chain tensioner
- 3-12 RPM rotational speed c/w soft start acceleration
- 1/2 HP AC variable speed motor
- Final revolution deceleration and positive stop alignment
- Front and back forklift ports for easy movement
Film carriage elevator:
- 1/2 HP AC variable speed motor
- ANSI #40 direct chain drive c/w shock dampener and anti-fall safety device
- Maintenance free carriage guidance system
Film delivery system:
- Super Rapid Thread II™ 20″ capacity pre-stretch film carriage
- Special film threading device - Uniquely orientates the sticky side of the film against the pre-stretch rollers and the inside of the load
- Loadloc™ carriage with patented tension roller
- 1/2 HP AC variable speed motor
- Fully electronic dynamic dancer corner compensation
- 33% to 313% fixed stretch capability
- Pre-stretch ratio variable using easy sprocket change
- Carriage descent obstruction safety shut-off device
- Rapid Thread™ Safety Door with auto power cut-off switch
- Side mounted film carriage for operator convenience and safety
- Superior film-to-roller contact area
- Lifetime warranty on pre-stretch rollers
Electrical input:
115 volts 1 phase 60 hz 15 amps
Automation:
- “All-electric – no pneumatics required”
- Electro-mechanically actuated film clamp mechanism
- Electro-mechanically actuated film tail cut/wipe arm mechanism
- Ni-chrome impulse hot wire film cut off c/w automatic periodic cleaning cycle
Control:
- PANASONIC PLC with touchscreen operator interface
- Power off – on – reset switch and power on indicator light
- Single-button auto wrap cycle start/pause
- Cycle pause for applying top sheets
- Reinforce wrap control for mid-wrapping
- Emergency stop button
- Turntable jog button
- Film carriage lower and raise buttons
- Film clamp open/close button
- Film tension (force-to-load) control
- Separate film carriage raise and lower speed controls
- Variable turntable speed control
- Triple beam auto load height sensing photo-eye, detects dark or shiny loads
- Separate 1 to 12 revolution top and bottom wrap control
- Selectable reduced film tension parameters for wrapping top and/or bottom of load
- A – B – C wrap program selector with capability to input and store unique wrapping parameters for each program
- Wireless remote start/stop control - Optional lanyard, pendant or pedestal control station available
- NEMA 12 control panel enclosure
- Non-proprietary UL/CSA approved components
Structural:
- All structural steel construction
- Forklift truck portable base structure design - Lifting tubes included for front and rear access
- Structural steel tube machine tower with sheet metal covers
- Electro-static powder coated paint finish
